General relativistic treatment of LISA optical links

LISA is a joint space mission of the NASA and the ESA for detecting low frequency gravitational waves in the band $10^{-5} - 1$ Hz. In order to attain the requisite sensitivity for LISA, the laser frequency noise must be suppressed below the other secondary noises such as the optical path noise, acceleration noise etc. This is achieved by combining time-delayed data for which precise knowledge of time-delays is required. The gravitational field, mainly that of the Sun and the motion of LISA affect the time-delays and the optical links. Further, the effect of the gravitational field of the Earth on the orbits of spacecraft is included. This leads to additional flexing over and above that of the Sun. We have written a numerical code which computes the optical links, that is, the time-delays with great accuracy $\sim 10^{-2}$ metres - more than what is required for time delay interferometry (TDI) - for most of the orbit and with sufficient accuracy within $\sim 10$ metres for an integrated time window of about six days, when one of the arms tends to be tangent to the orbit. Our analysis of the optical links is fully general relativistic and the numerical code takes into account effects such as the Sagnac, Shapiro delay, etc.. We show that with the deemed parameters in the design of LISA, there are symmetries inherent in the configuration of LISA and in the physics, which may be used effectively to suppress the residual laser noise in the modified first generation TDI. We demonstrate our results for some important TDI variables

Radiation Pressure Induced Instabilities in Laser Interferometric Detectors of Gravitational Waves

The large scale interferometric gravitational wave detectors consist of Fabry-Perot cavities operating at very high powers ranging from tens of kW to MW for next generations. The high powers may result in several nonlinear effects which would affect the performance of the detector. In this paper, we investigate the effects of radiation pressure, which tend to displace the mirrors from their resonant position resulting in the detuning of the cavity. We observe a remarkable effect, namely, that the freely hanging mirrors gain energy continuously and swing with increasing amplitude. It is found that the `time delay', that is, the time taken for the field to adjust to its instantaneous equilibrium value, when the mirrors are in motion, is responsible for this effect. This effect is likely to be important in the optimal operation of the full-scale interferometers such as VIRGO and LIGO.Comment: 27 pages, 11 figures, RevTex styl

Optimising the directional sensitivity of LISA

It was shown in a previous work that the data combinations canceling laser frequency noise constitute a module - the module of syzygies. The cancellation of laser frequency noise is crucial for obtaining the requisite sensitivity for LISA. In this work we show how the sensitivity of LISA can be optimised for a monochromatic source - a compact binary - whose direction is known, by using appropriate data combinations in the module. A stationary source in the barycentric frame appears to move in the LISA frame and our strategy consists of "coherently tracking" the source by appropriately "switching" the data combinations so that they remain optimal at all times. Assuming that the polarisation of the source is not known, we average the signal over the polarisations. We find that the best statistic is the `network' statistic, in which case LISA can be construed of as two independent detectors. We compare our results with the Michelson combination, which has been used for obtaining the standard sensitivity curve for LISA, and with the observable obtained by optimally switching the three Michelson combinations. We find that for sources lying in the ecliptic plane the improvement in SNR increases from 34% at low frequencies to nearly 90% at around 20 mHz. Finally we present the signal-to-noise ratios for some known binaries in our galaxy. We also show that, if at low frequencies SNRs of both polarisations can be measured, the inclination angle of the plane of the orbit of the binary can be estimated.Comment: 16 pages, 8 figures, submitted to Phys Rev

LISACode : A scientific simulator of LISA

A new LISA simulator (LISACode) is presented. Its ambition is to achieve a new degree of sophistication allowing to map, as closely as possible, the impact of the different sub-systems on the measurements. LISACode is not a detailed simulator at the engineering level but rather a tool whose purpose is to bridge the gap between the basic principles of LISA and a future, sophisticated end-to-end simulator. This is achieved by introducing, in a realistic manner, most of the ingredients that will influence LISA's sensitivity as well as the application of TDI combinations. Many user-defined parameters allow the code to study different configurations of LISA thus helping to finalize the definition of the detector. Another important use of LISACode is in generating time series for data analysis developments

Time Delay Interferometry for LISA with one arm dysfunctional

In order to attain the requisite sensitivity for LISA - a joint space mission of the ESA and NASA- the laser frequency noise must be suppressed below the secondary noises such as the optical path noise, acceleration noise etc. By combining six appropriately time-delayed data streams containing fractional Doppler shifts - a technique called time delay interferometry (TDI) - the laser frequency noise may be adequately suppressed. We consider the general model of LISA where the armlengths vary with time, so that second generation TDI are relevant. However, we must envisage the possibility, that not all the optical links of LISA will be operating at all times, and therefore, we here consider the case of LISA operating with two arms only. As shown earlier in the literature, obtaining even approximate solutions of TDI to the general problem is very difficult. Since here only four optical links are relevant, the algebraic problem simplifies considerably. We are then able to exhibit a large number of solutions (from mathematical point of view an infinite number) and further present an algorithm to generate these solutions

Experimental demonstration of higher-order Laguerre-Gauss mode interferometry

The compatibility of higher-order Laguerre-Gauss (LG) modes with interferometric technologies commonly used in gravitational wave detectors is investigated. In this paper we present the first experimental results concerning the performance of the LG33 mode in optical resonators. We show that the Pound-Drever-Hall error signal for a LG33 mode in a linear optical resonator is identical to that of the more commonly used LG00 mode, and demonstrate the feedback control of the resonator with a LG33 mode. We succeeded to increase the mode purity of a LG33 mode generated using a spatial-light modulator from 51% to 99% upon transmission through a linear optical resonator. We further report the experimental verification that a triangular optical resonator does not transmit helical LG modes

The Dynamics of Sustained Reentry in a Loop Model with Discrete Gap Junction Resistance

Dynamics of reentry are studied in a one dimensional loop of model cardiac cells with discrete intercellular gap junction resistance ($R$). Each cell is represented by a continuous cable with ionic current given by a modified Beeler-Reuter formulation. For $R$ below a limiting value, propagation is found to change from period-1 to quasi-periodic ($QP$) at a critical loop length ($L_{crit}$) that decreases with $R$. Quasi-periodic reentry exists from $L_{crit}$ to a minimum length ($L_{min}$) that is also shortening with $R$. The decrease of $L_{crit}(R)$ is not a simple scaling, but the bifurcation can still be predicted from the slope of the restitution curve giving the duration of the action potential as a function of the diastolic interval. However, the shape of the restitution curve changes with $R$.Comment: 6 pages, 7 figure

A How-To for the Mock LISA Data Challenges

The LISA International Science Team Working Group on Data Analysis (LIST-WG1B) is sponsoring several rounds of mock data challenges, with the purpose of fostering development of LISA data-analysis capabilities, and of demonstrating technical readiness for the maximum science exploitation of the LISA data. The first round of challenge data sets were released at this Symposium. We describe the models and conventions (for LISA and for gravitational-wave sources) used to prepare the data sets, the file format used to encode them, and the tools and resources available to support challenge participants.Comment: 10 pages, 1 figure, in Proceedings of the Sixth International LISA Symposium (AIP, 2006